Polski
Availability: 8 In Stock
All Cattegories
-
Motorcycle
addremove
-
Body
addremove
-
Braking system
addremove
-
Steering system
addremove
-
Drive system
addremove
-
Exhaust system
-
Used parts
-
Motogadget
addremove
-
Clothes
addremove
-
Engine parts
-
3D prints
Nanoflash
16 €
Dimensions: 15 mm x 9 mm x 5 mm
Safe shopping
Types of deliveries and payments:
[see details]
Complaints and returns:
[see details]
Guarantee safe & secure checkout
Nanoflash
The Nanoflash is one of the worldwide smallest electronic flasher relay on the bike market. With a size of 15 mm x 9 mm x 5 mm will it fit almost everywhere in your bike. The Nanoflash can handle loads between 0,1 Watt and 42 Watt. It replaces the standard flasher relay in custombikes. The Nanoflash is the first choice when the available space for the installation is small. The flasher speed is - of course constant if the load is minimum 0,1 Watt, no matter if modern led lights or traditional halogen light bulbs are be connected.
20 Items
Data sheet
- Manufacturer
- 27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28 - Dimensions
- 15 mm x 9 mm x 5 mm
15 mm x 9 mm x 5 mm - Body material
- ABS
- Input voltage range
- 8 - 18 Volt
- Maximum current
- 3
5 Ampere - Maximum power
- 42 Watt
- Producent
- 27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28
16 other products in the same category:
Availability: 10 In Stock
The 4 solder pins on the rear side are connected as follow:
Availability: Out of stock
Availability: Out of stock
Availability: 5 In Stock
Almost every bike what runs in US have a brake light / indicator combination in the way, that 2 lamps works as brake light and as indicator as well. This makes a conversion of an imported bike from Europe according to the requirements in the US a bit tricky. A conversion of an EU bike according to the requirements in the US is much easier and less cost intensive with the Rear Light US.
Availability: Out of stock
Availability: 9 In Stock
All you need to know:
- Material - made of durable stainless steel.
- Fixing - M6 bolt for secure attachment.
- Universal fit - compatible with all motorcycles.
- Positioning - adjustable design allows custom placement of brake reservoir on handlebar, master cylinder, or clutch.
- Versatility - ideal for stunt riders (concealed placement for tricks) and cafe racer builds (minimalist aesthetic).
- Braking system compatibility - designed for master cylinder setups.
Availability: 6 In Stock
Availability: 6 In Stock
Cyfrowa wiązka elektryczna wersja C-BS do sterowania motocyklem za pomocą przycisków i przełączników. Zawiera dwa małe moduły sterujące komunikujące się przez magistralę szeregową.
Availability: 8 In Stock
Availability: 10 In Stock
You can also remove the marker light function of the BCM module if you wire the Marker Light X between BCM module and the indicators. This eliminate the marker light function of the indicators.
Availability: 10 In Stock
As soon as an on-board voltage of 15.1 volts is exceeded for longer than 2 seconds, a warning flasher function is activated via the two blinker outputs and the additional LED output is switched on. In most cases, it is then sufficient to switch off the engine immediately to prevent major damage.
Availability: 4 In Stock