TSM4U

98 €
A short press of a turn signal button (less than 0.5 seconds) for overtaking causes the corresponding turn signal to flash 4 times. A longer press (more than 0.5 seconds) causes the corresponding turn signal to flash 40 times. This auto-cancel function can be disabled by switching on the dip switch on the pcb.
Quantity
Last items in stock

 

Safe shopping

  Types of deliveries and payments:

[see details]

  Complaints and returns:

[see details]

available payment methods

Guarantee safe & secure checkout

Delivery time shipment

TSM4U

This module replaces the old Harley TSM turn signal module for carburetor models that had the ignition module with two 12-pin connectors (gray and black) installed between model years 1999 and 2003. It supports ignition enable, starter enable, and has an integrated automatic turn signal cancel function.

A short press of a turn signal button (less than 0.5 seconds) for overtaking causes the corresponding turn signal to flash 4 times. A longer press (more than 0.5 seconds) causes the corresponding turn signal to flash 40 times. This auto-cancel function can be disabled by switching on the dip switch on the pcb.

A hazard warning light function is also integrated and is activated by pressing both turn signal buttons simultaneously.

The flasher frequency is independent from the load, no matter if led inserts or halogen bulbs are installed.

Please note that the module is intended for carbureted bikes.

3 Items

Data sheet

Manufacturer
27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28
Auto-cancel short press
4 flashes
Auto-cancel long press
40 flashes
Compatible models
Harley Davidson carbureted 1999-2003
Harley Davidson carbureted 1999-2003
Connector
Two 12-pin connectors
Producent
27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28

16 other products in the same category:

Fusebox

125 €
Availability: 10 In Stock
This fuse box contains 6 separate outputs which switch off in the event of a short circuit and switch on again after the short circuit has been eliminated. 4 of the outputs have continuous positive and 2 outputs can be switched on or off via 2 buttons. This can be used to switch additional headlights, cell phone chargers, etc. In addition, the supply voltage is monitored and the outputs in the mod

C-BS Harness

299 €
Availability: 6 In Stock
The digital harness C-BS ("BS" stands for switches and buttons) for the bike control via push buttons and switches is an universal harness, what contain 2 small control boxes. The control boxes "talk" together via a thin serial bus cable. The switches, push buttons and power cables are wired direct to the nearest box. This reduces the amount of cables and the installation time significant in a typ