Polski
All Cattegories
-
Motorcycle
addremove
-
Body
addremove
-
Braking system
addremove
-
Steering system
addremove
-
Drive system
addremove
-
Exhaust system
-
Used parts
-
Motogadget
addremove
-
Clothes
addremove
-
Engine parts
-
3D prints
Touch 2 Switch
44 €
You can use the module also as a standard headlight relay. Just wire the 2 thin input cables together to one push button. The first press on the push button will switch on output 1 (low beam). Every further press on the button toggle the 2 outputs.
Safe shopping
Types of deliveries and payments:
[see details]
Complaints and returns:
[see details]
Guarantee safe & secure checkout
Touch 2 Switch
This electronic relay have 2 independent channels what are controlled by 1 or 2 momentary push buttons. Every press on a button will toggle the corresponding output between on and off. Each output can drive 60 Watt. The small size allow an installation in the handlebar or in the headlight.
You can use the module also as a standard headlight relay. Just wire the 2 thin input cables together to one push button. The first press on the push button will switch on output 1 (low beam). Every further press on the button toggle the 2 outputs.
Advantages:
- Sometimes there is only a need for 1-2 switch channels what don't require a complete control box.
- The 2 inputs can be linked together in order to use it as headlight relay.
- The small dimensions allow an implementation in the most handle bars.
10 Items
Data sheet
- Manufacturer
- 27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28 - Dimensions
- 5 mm
38 mm x 16 mm x 11 mm
38 mm x 16 mm x 11 mm
40 mm x 25 mm x 12 - Body material
- ABS with 2k epoxy resin potted
- Input voltage range
- 6 - 18 Volt
- Maximum temperature
- 80°C
- Maximum output power
- 60 Watt / output
- Maximum current
- 20 Ampere / output
- Maximum power
- 360 Watt / module
- Producent
- 27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28
16 other products in the same category:
BLACK Upper Triple Tree Clamp (Yoke) BMW K75 K100 RS RT LT (1982-1991) Cafe Racer – Motogadget MINI
242 €
Availability: 5 In Stock
Availability: 20 In Stock
The Flasherbooster is connected between original flasher relay and your aftermarket indicators. It increase the supply voltages from the original flasher relay to 12 Volt and allow you to use your choice of aftermarket flashers at your bike. An integrated loadequalizer with 0,8 Watt load takes care for the correct flasher frequency in the most bikes.
Availability: 2 In Stock
Availability: 10 In Stock
The safety module check the 2 inputs for the neutral and sidestand switch and enables the start output when the neutral switch is closed, i.e. no gear is selected. The sidestand switch is also be checked. The ignition is switched off as long as a gear is engaged and the sidestand switch is open.
Availability: 1 In Stock
Availability: 10 In Stock
If an indicator fails in subsequent operation, i.e. the current consumed falls below 20% of the normal operating current, the Flasher Checker activates the hazard warning function for as long as the flasher relay is activated. The hazard warning function switches off automatically when the flasher relay is deactivated.
Availability: Out of stock
Availability: 18 In Stock
The small dimensions and the low weight of the electronic box devices allow in the most cases to fix the box with Velcro tape somewhere in the bike. However, for some rough situations we recommend to fix the box with this holder at the bike. The holder have 4 mm holes and a double sided sticky tape on the upper contact surface faced to the box, what prevent the box from unwanted moves if heavy vib
Availability: Out of stock
Availability: Out of stock
Availability: Out of stock
Availability: 10 In Stock
Care must be taken to ensure the correct position and alignment of the magnet during installation. The integrated LED helps to ensure correct alignment.
Availability: Out of stock
All you need to know:
- Universal compatibility - fits most top trees and front sets for BMW K-series motorcycles.
- Durable material - made from anti-corrosion Acrylonitrile Butadiene Styrene (ABS) for long-term use.
- Modern design - aesthetic appearance that combines style with functionality.
- Versatile mounting - can be installed in various locations on your motorcycle.
- Color - black.
- Braking system - compatible with all motorcycles' master cylinders.
Availability: 10 In Stock
The Rear Light EU is a module for Indian bikes with emergency flasher function. It converts the two signals from the original flasher / brake light combination in four separate outputs for brake light / rear light and indicators. A brakelight dim function is activated by default.