Polski
Availability: 7 In Stock
All Cattegories
-
Motorcycle
addremove
-
Body
addremove
-
Braking system
addremove
-
Steering system
addremove
-
Drive system
addremove
-
Exhaust system
-
Used parts
-
Motogadget
addremove
-
Clothes
addremove
-
Engine parts
-
3D prints
E-Harness
460 €
The E-Harness contain a dashboard control module and 2 power modules what control the 12 Volt power to all lights and other 12 Volt devices in a car. All switches and buttons at the dashboard are connected to the dashboard module. The modules "talk" via a small 2-wire data line. Almost all power outputs are short circuit protected and self resetting after the short circuit.
Safe shopping
Types of deliveries and payments:
[see details]
Complaints and returns:
[see details]
Guarantee safe & secure checkout
E-Harness - Universal Digital Harness for Cars
This set is the first choice for the supply of all 12 Volt devices in e-mobility vehicles and for the restauration of classic cars if you need to change the original harness due to its age.
The E-Harness contain a dashboard control module and 2 power modules what control the 12 Volt power to all lights and other 12 Volt devices in a car. All switches and buttons at the dashboard are connected to the dashboard module. The modules "talk" via a small 2-wire data line. Almost all power outputs are short circuit protected and self resetting after the short circuit.
This digital harness saves more than 100 meters of cable compare to a traditional harness.
Input voltage range: 7 - 18 Volt
3 Items
Data sheet
- Manufacturer
- 27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28 - Input voltage range
- 7 - 18 Volt
7 - 18 Volt - Modules
- 1 dashboard + 2 power modules
- Data line
- 2-wire
- Producent
- 27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28
16 other products in the same category:
Availability: 10 In Stock
The Rear Light EU is a module for Indian bikes with emergency flasher function. It converts the two signals from the original flasher / brake light combination in four separate outputs for brake light / rear light and indicators. A brakelight dim function is activated by default.
Availability: 1 In Stock
Availability: 9 In Stock
This cable kit allow you a fast and accurate build of your own bike harness. A 6 wire shielded cable allow a fast connection from the handle bar switches to your electronic box. The set comes with 30 cm shrink tube, 8 x 2 cm lettered shrink tube and 30 cable ties in 2 different sizes.
Availability: 10 In Stock
An auto-cancel function is integrated into the module. The corresponding output flashes 4 times when a turn signal button is pressed briefly for less than 0.5 seconds and then switches off. This function can be used for overtaking. If the button is pressed for longer than 0.5 seconds, the output flashes 40 times. The auto-cancel function can be deactivated by connecting the green wire to ground.
Upper Triple Tree Clamp (Yoke) BMW K1 K100 K1100 (1991-2002) RS RT LT Cafe Racer -Mini+Motosign...
242 €
Availability: 2 In Stock
Availability: 10 In Stock
As soon as an on-board voltage of 15.1 volts is exceeded for longer than 2 seconds, a warning flasher function is activated via the two blinker outputs and the additional LED output is switched on. In most cases, it is then sufficient to switch off the engine immediately to prevent major damage.
Availability: 10 In Stock
Care must be taken to ensure the correct position and alignment of the magnet during installation. The integrated LED helps to ensure correct alignment.
Upper Triple Tree Clamp (Yoke) BMW K75 K100 K1100 for the BMW S1000RR Suspension – Cafe Racer +...
726 €
Availability: Out of stock
Availability: 10 In Stock
Skrzynka bezpiecznikowa z 6 wyjściami zabezpieczonymi elektronicznie. 4 wyjścia ciągłe + 2 przełączane przyciskami. Ochrona przed niedoładowaniem akumulatora.
Availability: Out of stock
Availability: Out of stock