Pol Changer (Indian)
    Pol Changer (Indian)

Pol Changer (Indian)

43 €
Dimensions: 38 mm x 16 mm x 11 mm
Quantity
In stock

 
 

Safe shopping

  Types of deliveries and payments:

[see details]

  Complaints and returns:

[see details]

available payment methods

Guarantee safe & secure checkout

Delivery time shipment

Pol Changer (Indian)

Indian bikes switch the outputs for the direction indicators to minus, when active. This make a change of the original indicators against aftermarket indicators a bit tricky. This polarity changer is the solution for it. It convert the ground switched signal from the bcm module or flasher relay to a positive supply voltage for the indicators. The module contains 2 separate channels. The maximum load is 60 Watt per side.

Maximum output power: 60 Watt / output

20 Items

Data sheet

Dimensions
38 mm x 16 mm x 11 mm
Body material
ABS with 2k epoxy resin potted
Input voltage range
6 - 18 Volt
Maximum output power
60 Watt / output
Compatible with
Indian bikes
Producent
27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28

16 other products in the same category:

Marker Light X
Quick view

Marker Light X

43 €
Availability: 10 In Stock
You can also remove the marker light function of the BCM module if you wire the Marker Light X between BCM module and the indicators. This eliminate the marker light function of the indicators.
Evo Flasher 1
Quick view

Evo Flasher 1

69 €
Availability: 10 In Stock
An auto-cancel function is integrated into the module. The corresponding output flashes 4 times when a turn signal button is pressed briefly for less than 0.5 seconds and then switches off. This function can be used for overtaking. If the button is pressed for longer than 0.5 seconds, the output flashes 40 times. The auto-cancel function can be deactivated by connecting the green wire to ground.
B-Box
Quick view

B-Box

180 €
Availability: 10 In Stock
- Switch - output for parking light / Plate light / speedo etc.
Mini Safety Box
Quick view

Mini Safety Box

43 €
Availability: 10 In Stock
The safety module check the 2 inputs for the neutral and sidestand switch and enables the start output when the neutral switch is closed, i.e. no gear is selected. The sidestand switch is also be checked. The ignition is switched off as long as a gear is engaged and the sidestand switch is open.
Lunchbox Adaptor
Quick view

Lunchbox Adaptor

96 €
Availability: 10 In Stock
The reserve led for models up to 1985 is flashing when the fuel level is below 7 liter and it is continous on when the fuel level is below 4 liter. The housing is from a 3D printer and it's waterproof with epoxy glue potted.