GND Split
    GND Split

GND Split

5 €
Dimensions: 22 mm x 22 mm x 16 mm
Quantity
In stock

 
 

Safe shopping

  Types of deliveries and payments:

[see details]

  Complaints and returns:

[see details]

available payment methods

Guarantee safe & secure checkout

Delivery time shipment

GND Split

Many electrical problems at the bike result from a bad connection to the minus pole of the battery. The chassis is often in use as minus pole, what is not the best connection due to rust, paint or dirt at the contact screw. The Gnd-Split is a 4 pin divider what can be screwed direct at the minus pole of the battery. It can split up to 4 cables with a maximum size of AWG14.

Dimensions: 22 mm x 22 mm x 16 mm

78 Items

Data sheet

Manufacturer
27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28
Dimensions
22 mm x 22 mm x 16 mm
22 mm x 22 mm x 16 mm
Number of outputs
4
Maximum cable size
AWG14
Producent
27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28

16 other products in the same category:

OV Filter
Quick view

OV Filter

22 €
Availability: 10 In Stock
- The ignition produces approx. 20000 - 30000 volts, which means that narrow needle pulses of up to 100 volts or more can be measured on the cables. These overvoltages are often sufficient to destroy parts of the electronics after some time.
B-Box
Quick view

B-Box

180 €
Availability: 10 In Stock
- Switch - output for parking light / Plate light / speedo etc.
Flasher Booster
Quick view

Flasher Booster

39 €
Availability: 20 In Stock
The Flasherbooster is connected between original flasher relay and your aftermarket indicators. It increase the supply voltages from the original flasher relay to 12 Volt and allow you to use your choice of aftermarket flashers at your bike. An integrated loadequalizer with 0,8 Watt load takes care for the correct flasher frequency in the most bikes.
D-Box
Quick view

D-Box

167 €
Availability: 15 In Stock
- Integrated flasher relay, contol with buttons or switches
Fuel Indicator
Quick view

Fuel Indicator

41 €
Availability: 16 In Stock
The adjustment of the reserve level is easy: Just connect the module, fill the first required amount of gasoline in the tank and hold the green cable for a moment to ground / Minus. Now the module have store the first value. Then fill the next gasoline level in the tank and repeat the procedure and the module have stored the second fuel level.